Two-components, excellent compromise between curing behavior and open time
Products
Our
products
Polymer Solutions for Wind Turbine Rotor Blades
We strive to offer our customers a complete portfolio of products, so all blade finish layers are provided from one single source. Our product mix includes gel coats, filler & putties, topcoats & primers and LEP, with versions for both manufacture and repair of blades. With regard structural products, our portfolio includes bonding paste solutions both in glass filled and toughened technologies to better support all our customer needs.
Our deep material knowhow in both Epoxy and PU chemistry technologies, together with our blade manufacturing expertise in the field, makes us the best partner for your future product developments.Our goal is to get you outstanding materials, in line with the most demanding physical properties performance and in extreme weather conditions. We target to reduce your production takt time while balancing material cost and the overall blade weight.
Filter by:
Manufacturing Process
Aplication
Technology
Bonding Pastes Range
AROBONDTM 921
Glass Filled
old nameEPOLIT® FIX 921
Performance & Features
| Mix Ratio | 100:45 |
| Ultimate Tg | >90 |
| Sag resistance | >20 mm |
| Open time | |
| Processability |
AROBONDTM 931
Thoughened
Two-components, High fracture toughness response, low density
old nameEPOLIT® FIX 931
Performance & Features
| Mix Ratio | 100:33 |
| Ultimate Tg | >75 |
| Sag resistance | >20 mm |
| Open time | |
| Processability |
AROBONDTM 940
Repairs
old nameEPOLIT® FIX 940
Performance & Features
Fillers & Putties Range
AROFILLTM 890
Epoxy Based
Two-components, Epoxy based, easy to sand, fast curing, smoth surface.
old nameEPOLIT® MS 890
Performance & Features
| Mix Ratio | 100:56 |
| Gel time | >35 |
| Sag resistance | >4 |
| Fatigue response | |
| Drying | |
| Easy to sand |
AROFILLTM 907
Polyurethane Based
Two-components, Poliurethane based, easy to sand and very fast curing time.
old nameEPOPUR® MS 907
Performance & Features
| Mix Ratio | 100:33 |
| Gel time | >5 m |
| Sag Resistance | >4 |
| Drying | |
| Easy to sand |
AROFILLTM 914
old nameEPOPUR® FIX 914
Performance & Features
In-mould process coat
AROGELTM 118
Non UV Resistant
Two-components, traslucent, easy sanding, fast curing, suitable for infusion prepreg/process
old nameEPOLIT® GC E118
Performance & Features
| Mix Ratio | 100:20 |
| Ultimate Tg | >90 |
| Gel Time | >12 |
| Easy to sand | |
| Drying |
AROGELTM 131
Two-components, high UV resistance, coloured, easy sanding, suitable for infusion/prepreg process
old nameEPOLIT® GC E131
Performance & Features
| Mix Ratio | 100:19 |
| Ultimate Tg | >90 |
| Gel Time | >12 min |
| Easy to sand | |
| Drying |
AROGELTM 135
UV Resistant
Two-components, high UV resistance, traslucent, easy sanding, fast curing, suitable for prepreg/infusion process
old nameEPOLIT® GC E135
Performance & Features
| Mix Ratio | 100:20 |
| Ultimate Tg | >90 |
| Gel Time | >12 |
| Easy to sand | |
| Drying |
Paints and Top Coats Range
AROTOPTM 198
Fast Curing / Matt
Two-components, fast curing, very good surface finish
old nameEPOPUR® PT 198 MATT
Performance & Features
| Mix Ratio | 100:18 |
| Gel time | >4 |
| Sag Resistance | >200 |
| Layer thickness | >90 microns |
| VOC'S content | |
| Color Retention |
Leading Edge Protection
AROPRIMTM 108
Two-components, Poliurethane based, best layer interface, fast curing time.
old nameAHP PRIMER® 108
Performance & Features
| Mix Ratio | 100:50 |
| PULL-OFF ADHESION | >5 Mpa |
| Gel time | >7 min |
| Easy to use |
AROLEPTM 920
Polyurethane Based
Two-components, Poliurethane based, fast curing time, proven efficiency, high UV, rain and abrasion resistance
old nameAHP LEP® 920
Performance & Features
| Mix Ratio | 100:50 |
| PULL-OFF ADHESION | >6 Mpa |
| Rain Erosion Resistance | >16hrs(Small spots of erosion) |
| Gel time | >14 min |
| Easy to use |